ERGO
Software update

Training videos
For service technicians only!

Update: HMI via USB

Update: PLC via SD

NOTICE!

When copying software the USB stick and SD card needs to be FAT32 formatted.

Don’t use USB / SD larger than 32 GB.

  1. Insert USB stick / SD card
  2. Navigate to drive
  3. Right click on drive
  4. Choose “Format”
  5. Choose “FAT32” under file system in the dialog box
  6. Click “Start”
  7. Then copy the software / folder to the formatted USB / SD.
  1. Insert USB stick / SD card
  2. Open APP “Disk Utility”
  3. Navigate to drive
  4. Right click on drive
  5. Choose “Earse”
  6. Choose “FAT32”
  7. Click “Erase”
  8. Then copy the software / folder to the formatted USB / SD.

IMPORTANT!

Before rebooting the ERGO mixer remove the USB / SD after update. 

Developed for the ERGO Serie
60, 100 and 140 (150 US)

Varimixer - ERGO - User Manual